SJ23 Tech Tip J07, (Updated 2026-10-28) Bob Schimmel

Index

Winch Handle Holder- Clean, Prevent Handle Snag.

Most of us have a winch handle holder mounted somewhere in the cockpit for convenient use.  It also keeps a loose a handle onboard.  Problem is, the holder collect bits of plant debris that are difficult to remove from the bottom unless you store your boat under a roof.  Even then its going to collect some stuff you don't want plugging the drain hole down there.  So how do you remove it, easily?

CLEAN - Simple, float it out.  Fill it with water (pail, hose, etc), stir the debris with a chop stick so it rises to the surface and flows out.  At least the cockpit seats are easy to clean with the same bucket.  By the way, introduce your thumb to the drain hole!

PREVENT HANDLE SNAG - Panache's winch handle holder was mounted against the cabin bulkhead, port side.  It was also a convenient to clip my keys there so I didn't leave them in the cabin when closing the boat.  However, the mainsheet on Panache had a nasty habit of snagging the winch handle since it stuck out a wee bit from the front of the holder.  Its annoying to say the least and expensive if the sheet should snag the handle to flip it overboard.  I've caught it a couple of times in mid flight.  So, I cut a curve, matching the handle, in the side of the holder.  The handle now automatically nestles in the notch, flat against the bulkhead, solving the problem.  Why I never thought of this a zillion years ago I'll never know!
 

Return to Tech Tip Index. . . . . . . . . . . . . . . Have a Question?